Introduction:
KW5588 ceramic tile back adhesive is a white latex composed of polymer emulsion and special auxilliary, which can effectively solve the problem of hollow drum falling off the traditional cement mortar shop with glazed brick and stone.
Applicable Scope
Back processing to low water absorption of a variety of glass brick, archaize brick, culture stone, polished brick
Renovation of old tiles
Performance Characteristics
1. Good water resistance, acid and alkalinity resistance, high heat change performance
2. Strong adhesion to the surface of the substrate with low water absorption
3. Good compatibility with water-based mortar and good anti-seepage performance
4. Prevent the hollow and peeling of tiles
5. Green, non-toxic and harmless
Application Methods
1. Clean the back surface of ceramic tile substrate
2. Apply roller coating on the back of ceramic tile substrate
3. Reference dosage: 0.3mm thick (0.3-0.4kg/m2)
Storage and transportation
1. The product should avoid extrusion during packaging and transportation and keep the package intact.
2. The product should be stored in a cool, ventilated and dry place with a storage temperature of 5-335 ℃
3. Shelf life of unused products is 12 months under normal storage and transportation conditions
4. The products are packed in plastic buckets;5 kg/barrel
Cautions
1. Clean the surface of ceramic tile substrate
2. The product should be sealed and preserved before use
3. The brush thickness is within the range of 0.2-0.4mm,without too thick
